Startwin 2T TC-W3
7110501
Startwin 2T TC-W3 is a semi-synthetic lubricating oil, specially formulated to meet the demands of all water-cooled 2-stroke marine outboard engines, from traditional carburetion to modern direct injection (DFI), according to the demanding NMMA TC-W3 specification. , thus guaranteeing an excellent protection against corrosion and rust in a marine environment, as well as a high protection of the piston and the spark plug, offering improved properties compared to the previous quality level NMMA TC-WII.
PROPERTIES AND ADVANTAGES:
- Exceptional lubricating ability, avoiding piston seizure.
- Excellent protection against rust and corrosion in moist fresh and saline water environments.
- High anti-wear capacity, guaranteeing optimum protection of the piston and therefore improving the performance of the whole motor due to the reduction in losses to friction.
- Complete and rapid miscibility with petrol.
- High dispersant and detergent ability, avoids build-up of deposits in the combustion chamber, ring sticking, and keeps the elements of the engine in an ideal state of cleanliness, lengthening the working life of the motor.
- Ash-free, reducing the risk of pre-ignition and spark plug glazing, guaranteeing efficient fuel consumption and minimal residue formation.
APPLICATIONS:
- Two-stroke water-cooled marine outboard motors with NMMA TC-W3 and direct injection FDI specifications.
- Air-cooled 2T engines for motorcycles, mopeds, scooters, snowmobiles, jet skis, pleasure boats, chainsaws, leaf blowers, garden machinery, etc.
- Recommended for all type of oil-petrol and oil-petrol with ethanol pre-mix systems.
SPECIFICATIONS:
Water-cooled motors |
Air-cooled motors |
NMMA TC-W3 |
API TC |
Direct Fuel Injection (DFI)* |
JASO FD |
*Suitable for use (SFU)
TECHNICAL DATA:
PHYSICOCHEMICAL CHARACTERISTICS |
STANDARD |
VALUE |
Color |
Visual |
Bluish green |
Viscosity at 40 °C (cSt) |
ASTM D-445 |
45.0 - 55.0 |
Viscosity at 100 °C (cSt) |
ASTM D-445 |
7.5 - 8.5 |
Density at 15 °C, Typical (kg/l) |
ASTM D-1298 |
0.875 |
Pour point (°C) |
ASTM D-97 |
< - 25 |
Flash point (°C) |
ASTM D-92 |
> 90 |
No reviews