Maxigear Atox 100 100% synthetic and non-toxic oil

Maxigear Atox 100

7196320

Multifunctional ATOXIC 100% synthetic lubricant, manufactured with Polyalphaolefin (PAO) oils and ash-free additives, especially for the lubrication of gears and closed gearboxes. Also ideal for hydraulics, compressors, chains and general greasing, where oils with these viscosity grades are required.

Available in
  • 20 Litres
  • 200 Litres
 

Formulated from FDA (Food and Drug Administration) approved components, they comply with the USDA-H1 standard, required for those lubricants used in the food and pharmaceutical industry where there is a risk of technically unavoidable incidental contact between the lubricant and the food.

 

PROPERTIES AND ADVANTAGES:

 

ü  Excellent ability to withstand very high loads, as well as a very extensive range of working temperatures.

ü  Low coefficient of friction and increased wear protection, which, together with higher thermal conductivity and heat dissipation capacity, results in lower operating temperatures and additional energy savings compared to mechanisms using conventional mineral oils.

ü  Excellent resistance to thermal degradation, ageing and rusting, preventing the formation of harmful oxidation products, even at high temperatures, while maintaining excellent anti-corrosion properties.

ü  Reduced build-up of deposits, keeping the gears in an optimum state of cleanliness.

ü  Its high viscosity index results in a minimal viscosity variation against temperature changes.

ü  High adherence and greasiness.

ü  Excellent fluidity at extreme low temperatures, making it especially useful in freezing systems and industrial cold stores.

ü  Compatible with elastomers (NBR, FPM), gaskets, seals and paints used in food manufacturing and packaging machinery.

ü   

FIELDS OF APPLICATION:

 

ü  Lubrication of all types of gears under closed crankcase.

ü  Piston, vane and blower compressors; vacuum pumps and hydraulic units requiring high viscosity oils (ISO-100 and higher).

ü  Lubrication of bearings, plain and anti-friction bearings under crankcase or by circulation systems in closed circuits.

ü  Products also suitable and recommended for the lubrication of chains working in extreme temperature ranges.

ü  General greasing of mechanical parts in the food and pharmaceutical industry.

SPECIFICATIONS / QUALITY LEVEL:

GEARBOXES

COMPRESSORS

HYDRAULIC SYSTEMS

DIN 51517/3: CLP

DIN 51506: VCL y VDL

DIN 51524/3: HV

ISO 1295-1: CKC, CKD, CKS

ISO 6743/6: CKC, CKD, CKS

ISO 6521-1: DAC y DAJ

ISO 6743/3: DAC y DAJ

ISO 11158: HV   

ISO 6743/4: HV

APPROVALS:

Category Code H1

NSF Registration No.: 141981

HALAL License No.: IH-986/2.4/M/60

 

TECHNICAL DATA:

PHYSICOCHEMICAL CHARACTERISTICS

STANDARD

100

150

220

320

460

ISO grade

ISO 3448

100

150

220

320

460

Viscosity at 40 °C (cSt)

ASTM D-445

90-110

135-165

198-242

288-352

414-506

Viscosity at 100 °C (cSt)

ASTM D-445

13-15

17-20

23-26

29-35

39-45

Viscosity Index; min.

ASTM D-2270

140

140

140

140

140

Flash point, ºC, min

ASTM D-92

230

240

240

240

240

Pour point, ºC, max

ASTM D-97

-40

-40

-40

-35

-35

4-ball AW test (40 Kg/1200rpm/75ºC/1h), scar mm

ASTM D-4172

< 0.35

< 0.35

< 0.35

< 0.35

< 0.35

FZG test (load phase pass)

DIN 51354/2

>12

>12

>12

>12

>12

Copper corrosion (3h, 100 °C), grade max.

ASTM D-130

1a

1a

1a

1a

1a

8436044741333
No reviews

Attachments

Product added to wishlist
Product added to compare.