Acat 300 non-toxic synthetic oil pharmaceutical and food industry

Acat 320

7196120

ATOXIC 100% synthetic multifunctional lubricant based on Polyalphaolefin (PAO) and ash-free additives, especially for chains requiring oils with these viscosity grades.

Available in
  • 20 Litres
  • 200 Litres
 

Formulated from FDA (Food and Drug Administration) approved components, they comply with the USDA-H1 standard, required for those lubricants used in the food and pharmaceutical industry where there is a risk of technically unavoidable incidental contact between the lubricant and the food.

ACAT F-20 is mineral based and specially designed for chains working at normal temperatures.

 

PROPERTIES AND ADVANTAGES:

ü Exceptional lubricating characteristics, far superior to those of a conventional mineral oil.

ü High thermal stability and resistance to rusting even at very high temperatures. Improves system cleanliness and allows longer lubrication periods with savings in maintenance costs.

ü Low freezing point. Good lubrication at low temperatures during start-up.

ü Excellent protection against rust and corrosion on all metal surfaces.

ü Compatible with all seals and paints normally used for mineral oils.

 

FIELDS OF APPLICATION:

Especially recommended for the lubrication of chains (autoclave chains, pasteurising ovens, dragging chains in cold rooms, industrial slaughterhouses, heat curing and paint ovens, and in general, in all types of applications in the food industry, textile industry (they do not stain), paints, rubbers, etc., where these viscosity grades are required.

Suitable for thermal curing processes with dry and saturated water vapour, even in the presence of acids and/or alkalis.

-In certain "lubrication for life" systems, in the food industry, textile industry, graphic arts (Roland, Heidelberg machines, etc.), high temperature chain lubrication (RAMES) and in the chemical industry in general, where lubricating oils with the characteristics and properties indicated are required.used for mineral oils.

-If lower viscosity oils are required, we recommend using the MAXIGEAR-ATOX or the FLOW SYN CP ATOX range, which are perfectly prepared for chains.

 

SPECIFICATIONS / QUALITY LEVEL:

DIN 51517/3: CLP

ISO 6743/6: CKC, CKD, CKS

ISO 1295-1: CKC, CKD, CKS

 

APPROVALS:

  •  Category Code H1

  •  NSF Registration No.: 141982

  •  HALAL License No.: IH-986/2.4/M/60

PHYSICOCHEMICAL CHARACTERISTICS:

 

BASE

ISO VG

VI

Working Temperatures

Flash Point

Pour Point

ACAT 320

PAO

320

>140

-30ºC a +180ºC

>240ºC

-35ºC

ACAT 460

PAO

400

>140

-30ºC a +180ºC

>240ºC

-35ºC

ACAT F-20

AC. BLANCO

220/320

>95

-20ºC a +100ºC

>220ºC

-25ºC

No reviews

Attachments

Product added to wishlist
Product added to compare.