Strub Spindelfluid XLI
OLP00054
Strub Spindelfluid XLI is a low-toxic, environmentally friendly inhibitor concentrate.
Description
Strub Spindelfluid XLI is a low-toxic, environmentally friendly inhibitor concentrate.
Strub Spindelfluid XLI is a low-toxic, environmentally friendly inhibitor concentrate.
Application
Based on patented aliphatic acid technology, Strub Spindelfluid XLI provides long-life corrosion protection in aqueous solutions for all engine metals, including aluminium, iron, copper and solder alloys.
Mixing ratio : 7 Vol.% in tap water.
The concentration should be periodically checked by refractometer (% Brix).
Refractometer reading x 2.9 =% vol effective concentration.
By not expected change Strub Systemcleaner (ask for TDB) should be added with 2% into the system minimum 24 hours before changing.
Features and Benefits
- Extended & superior corrosion protection.
- Superior technology.
- Excellent protection.
- Reliability.
- Improved hard water stability.
- Save time and money.
- Save time and money.
- Environmentally friendly.
Technical Parameter | Strub Spindelfluid XLI | Method |
Inhibitor content | 33% w/w | |
Water content | 67% w/w | ASTM D1123 |
Nitrite, amine, phosphate, borate, silicate | Nil | |
Colour | colourness | |
Density at, ºC | 1,055 typ. | ASTM D1122 |
pH | 9,4 typ. | ASTM D1287 |
Cloud point | -15ºC typ. | |
Storage stability | 3 years |
Seals Compatibility:
Nitril rubber Hydrogenated nitril rubber Acrylate rubber Silicon rubber Fluorated rubber, e.g. Viton from DuPont Ethylene-propylene-diene-rubber Butyl rubber Natural rubber Styrolbutadiene rubber Polychlorinated butadiene- elastomers, e.g. neoprene from DuPont Polytetrafluorethylene, e.g. teflon from Hostaflon Polyethylene, low density and high density Polypropylene Polyvinylchloride, soft and hard type Polyamide Polyester resin Elastogran 1100 |
NBR H-NBR ACM MVQ FPM EPDM IIR NR SBR CR PTFE LDPE and HDPE PP PVC PA UP PUR-Ether |
No reviews