FLOW SYN CP 68 20L.

Flow Syn CP 68

7195820
100% synthetic lubricant made from Polyalphaolefin (PAO) oil - ester and ashless additives, especially for the lubrication of air compressors, vacuum pumps, hydraulic systems and general lubrication where oils with these viscosity grades are required.
Available in
  • 20 Litres
  • 200 Litres
 

PROPERTIES & ADVANTAGES:

  • Excellent resistance to oxidation (overpasses the Pneurop Oxidation Test) and very high thermal and chemical stability.
  • With a very low tendency to the formation of sludge, lacquers, deposits and carbonaceous residues, it minimizes the formation of residues in valves and pistons, avoiding the risk of explosions and fires.
  • Its high flash point and low volatility provide greater safety and reduce product consumption.
  • It allows very long change intervals of (up to 8,000h or more in screw compressors), reducing product and maintenance costs.
  • Wide range of working temperatures.
  • Low coefficient of friction and greater wear protection, which together with better thermal conductivity and heat evacuation capacity generates lower working temperatures compared to conventional mineral oils.
  • High anti-rust and anticorrosive power, minimal foam formation and excellent demulsification capacity.
  • Compatible with commonly used gaskets and seals, as well as mineral oils and other compatible synthetics.

APPLICATIONS:

  • Lubrication of all types of air compressors: rotary (vanes, centrifugal or screw) and alternative (piston, mono or multistage), either static or portable, operating at compression / discharge temperatures of up to 220 °C and pressures above 10 bars.
  • The ISO VG viscosities 32, 46 and 68 are those commonly used in rotary compressors (46 in Screw).
  • The ISO VG viscosities 100 and 150 (SAE 30 and 40) are those commonly used in reciprocating compressors.
  • Exceptional filterability, its zinc-free additive package allows it to be used in hydraulic systems where ash-free fluids are required, avoiding the formation of sludge in very low-micron filters as well as the formation of lacquers in servo valves and actuators, being valid for greasing reducers under normal load conditions.

SPECIFICATIONS / QUALITY LEVEL:

Quality level according to the ISO 6743-11 PBD standard.

COMPRESSORS

HYDRAULIC SYSTEMS

DIN 51506: VCL and VDL

DIN 51524 Parte 2 (HLP)

ISO 6521-1: DAC and DAJ

ISO 6743/3: DAC and DAJ

ISO 11158 (HM)

ISO 6743/4 (HM)

TECHNICAL DATA:

PHYSICOCHEMICAL CHARACTERISTICS STANDARD VALUE
Grade ISO ISO 3448 68
Viscosity at 40ºC (cSt) ASTM D-445 62-74
Viscosity at 100ºC (cSt) ASTM D-445 9.5-11
Min. viscosity index ASTM D-2270 120
Density at 15ºC, Typical (kg/l) ASTM D-1298 0.840
Freezing point (ºC) Máx. ASTM D-97 -50
Flash point COC (ºC) ASTM D-92 >230
Sulphated ash (% wt) ASTM D-874 <0,01
Foam Test: (Seq. I/II/III, Max. Format) ASTM D-892 50
Copper corrosion (3h, 100ºC), Degree ASTM D-130 1a
8436551580760
No reviews

Attachments

Product added to wishlist
Product added to compare.