Olicut Lat Eco

Olicut 515

7675520
Olicut 515 is a synthetic biodegradable cutting fluid formulated from esters. Contains no mineral oils or chlorinated additives.
Available in
  • 20 Litres
  • 200 Litres
 
Olicut 515 is a synthetic biodegradable cutting fluid formulated from esters. Contains no mineral oils or chlorinated additives. This product is specially designed for use in MQL (Minimum Quantity Lubricant) lubrication systems.
 
Properties and Advantages:
 
Highly biodegradable product (> 90%) with no negative effects on the environment.
 
Reduction in smoke emission and mist formation with respect to mineral oils, which allows cutting speeds to be increased without the need to install extraction systems. Improvement of workers' safety. Reduced friction between workpiece and tool, reducing wear and consequently increasing tool life. This results in an increase in the sharpening and platelet change intervals, and therefore a drastic reduction in maintenance costs.
 
Excellent surface finishes of machined parts.
 
It does not stain or obscure parts.
 
The use of Olicut 515 in MQL systems has the following benefits:
 
- Elimination of waste management costs, since the fluid is eliminated with the chip, the part and by evaporation.
- Consumption of optimum fluid. Saving on fluid consumption compared to traditional products.
- Suppression of cooling and filtration systems for emulsifiable fluids.
- Higher cutting speeds, which implies a reduction of production time and a greater efficiency in the machining process.
- In many cases, subsequent cleaning of the machined parts is not necessary because these are almost dry.
- Operator friendly. Reduction of occupational hazards and improvement of company image.
 
Applications:
 
Olicut 515 is formulated with selected synthetic bases, EP additives (extreme pressure), antioxidants and anticorrosives. Suitable for general machining operations and high severity such as lathing, milling, drilling, sawing, tapping, etc.Specially suitable for application in lubrication systems for a small amount by microgrinding, as well as in high precision applications requiring an excellent surface finish.
 
Compatible with all types of metals (both ferrous and non-ferrous alloys): castings, high tensile steels, stainless steels and copper or aluminium alloys.
  
Technical Data:
  
Physio-chemical characteristics Standard Value
Colour ASTM D-1500 L-1,0
Viscosity at 40ºC (cSt) ASTM D-445 35
Density at 15ºC (kg/m3) ASTM D-1298 917
Flash point, COC, (ºC) ASTM D-92 >250
Steel corrosion CETA-20516 Complies
Copper corrosion, 3h, 100ºC ASTM D-130 1a
Wear test 4 balls, track diameter (mm) ASTM D-4172 <0,7
Test 4 balls, welding load (kg) ASTM D-2783 >620
No reviews

Attachments

Product added to wishlist
Product added to compare.