English 
Español
Français
Português
Vulcan Estamp CF 9661 V4
OLP00102
Vulcan Estamp CF 9661 V4 is a high performance oil for stamping and drawing steel and its alloys, free of chlorine.
Description:
Vulcan Estamp CF 9661 V4 is a high performance oil for stamping and drawing steel and its alloys, free of chlorine.
Applications:
Stamping, forming and deep drawing of steel parts made from sheet metal, from 1 mm to 15 mm thick.
Characteristics:
Sheet steel forming oil, based on a synergistic and effective combination of mineral oils and special high performance additives, free of chlorine, solvents, polychlorinated biphenyls (PCBs) or any other organochlorine compounds.
Due to its high stability against oxidation, low evaporation and high EP capacity, Vulcan Estamp CF 9661 V4 gives a perfect finish, with the maximum protection of the matrix.
100% satisfied customers with Vulcan Estamp CF 9661 V4:
- Operation: Sheet steel stamping, forming and cutting.
- Material: Chrome-plated steel and steel sheets up to 4mm thick
- Tools: Punching tools and complete set of cutting tools for sheet steel.
- Machines: 40/70/100 ton eccentric presses for stamping and 200 ton for forming and deep drawing.
- Drawing results: Pieces without marks or seizures; Even after 2000 hours the tools do not need to be ground or polished.
- Drawing results: Notable increase in the number of pieces worked by more than 30% with the same tool and up to 60% more production capacity.
Technical Data:
| Physio-chemical characteristics | Value |
| Colour | Chestnut |
| Density at 20ºC, g/cm3 | 1,061 |
| Viscosity at 40ºC, mm2/s | 143 |
| Flash point, ºC | >150 |
| Freezing point, ºC | <-10 |
No reviews
Tap to zoom
