Maxifluid Brake 1/2 L

Maxifluid Brake

7612508

Maxifluid Brake is a DOT 4 synthetic grade brake fluid recommended for all brake and clutch systems requiring synthetic fluids of this quality level and specially for vehicles with ABS, ASR, ESP®, etc.

Available in
  • 1/2 Litres (40x1/2L)
 

Maxifluid Brake is a DOT 4 synthetic grade brake fluid recommended for all brake and clutch systems requiring synthetic fluids of this quality level.
 
Maxifluid Brake has a boiling point (stable reflux) of 260ºC, much higher than that offered by conventional DOT4 brake fluids, avoiding the formation of bubbles in the circuit at high temperature which, added to its low viscosity, make it a product specially recommended for use as high-security brake fluid in vehicles fitted with braking assistance, stability control and ABS traction control, ASR, ESP®, etc.
 
Maxifluid Brake is approved by INTA-National Institute of Aerospace Techniques- (Certificate of Results No. 303).
 
Attention: For your safety, do not use brake fluids that are not approved by INTA (National Institute for Aerospace Technology).
 
Maxifluid Brake is miscible with other DOT 3, DOT 4 and DOT 5.1 quality level brake fluids  (with a polyglycol base). Do not mix with DOT 5-type brake fluids (silicone base).
 
Remember: Brake fluid is one of the most important components in a braking system. It performs the function of transferring the brake force from the master cylinder to the wheel brakes (callipers or wheel cylinders), to lubricate hydraulic components and to protect against corrosion and its safety depends on the good condition of conservation of the brake fluid.
 
Check your condition regularly at a specialist service centre, specially if you detect system leaks or loss of level and replace it every two years or even earlier if necessary.

8436021370433
No reviews

Attachments

Product added to wishlist
Product added to compare.