Flow Hammer Q 20L.

Flow Hammer Q

7653220
Flow Hammer Q is a lubricant for drilling machinery, strongly additivated with medium and extreme pressure additives. It also contains anti-corrosive additives, antifoams, antioxidants and bactericides.
Available in
  • 20 Litres
  • 200 Litres
 
Description:
 
Flow Hammer Q is a lubricant for drilling machinery, strongly additivated with medium and extreme pressure additives. It also contains anti-corrosive additives, antifoams, antioxidants and bactericides.
 
Properties:
 
- Increases the life and performance of tools.
- Reduces wear of lubricated parts. 
- Great smoothness and adhesion.
 
Specially recommended for ATLAS COPCO, COMPAIR HOLLMAN, GEIS, INGERSOLL-RAND, MEUDON and MONTABERT pneumatic tools, even under extreme cold or heat conditions.
 
It is recommended not to mix this product with conventional mineral oils or oils for gear lubrication. In case of doubt consult our technical service.
 
Applications:
 
It is used in the lubrication of small hammers and pneumatic drilling machinery. Its total insolubility in water, intrinsic to the nature of its components and additives, gives it high resistance to air entrainment and to the possible condensation that is usually formed on the tool with the use of conventional mineral oils.
 
Suitable for use in galleries of tunnels and mines with poor ventilation, due to the absence of misting and low odour.
 
Technical Data:
   
Physio-chemical characteristics Standard Value
Nature ----- Oil
ISO Grade  ISO 3448 VG-46
Density at 15°C, Typical (kg/l) ASTM D-1298 0,905-0,915
Freezing point (ºC) Máx. ASTM D-97 <-10
Flash point COC, mín. (ºC) ASTM D-92 <-180
TIMKEN OK, Lbs., Mín. ASTM D-2798 45
Wear test, 4 balls, Track (mm) ASTM D-130 1b
No reviews

Attachments

Product added to wishlist
Product added to compare.