Acat F-20

Acat 400

7195420
Food-grade synthetic oils for the food and pharmaceutical industries. Formulated from components approved by the FDA (Food and Drug Administration), meeting as a whole the requirements of the standard H1 for lubricants that could have incidental food contact for human consumption. ACAT F-20, is mineral and special for chains that work at normal temperatures.
Available in
  • 20 Litres
  • 200 Litres
 

APPLICATIONS:

Especially recommended for lubrication of autoclave chains, chains from pasteurization ovens, conveyor chains in cold rooms, industrial slaughterhouses, chains from thermal curing ovens, paint ovens, pump bearings and generally in all kinds of similar applications of food industry, textile, paint, rubber, etc..
No stain. Suitable for thermal curing processes with dry and saturated steam, even under the presence of acids and / or alkalis.
Certain “lubed for life” systems, in food industry, textile, printing (machinery Roland, Heidelberg, etc.), chain lubrication at high temperature (RAMES) and in the chemical industry in general, where lubricating oils with similar characteristics and properties are required.
Steel gears systems under medium loads and a wide range of speeds.
Vacuum pumps, hydraulic systems, oil circulating systems, ball and journal bearings.


PROPERTIES:

Especially recommended for lubrication of autoclave chains, chains from pasteurization ovens, conveyor chains in cold rooms, industrial slaughterhouses, chains from thermal curing ovens, paint ovens, pump bearings and generally in all kinds of similar applications of food industry, textile, paint, rubber, etc..
No stain. Suitable for thermal curing processes with dry and saturated steam, even under the presence of acids and / or alkalis.
Certain “lubed for life” systems, in food industry, textile, printing (machinery Roland, Heidelberg, etc.), chain lubrication at high temperature (RAMES) and in the chemical industry in general, where lubricating oils with similar characteristics and properties are required.
In case you need oils with lower viscosities than those available in the ACAT range, depending on the required viscosity, we recommend using MAXIGEAR-ATOX or FLOW SYN CP ATOX, perfectly prepared for chains.



APPROVALS:

Code H1 Category

NSF Registration No.: 141982


PHYSICOCHEMICAL CHARACTERISTICS:

 

BASE

ISO VG

VI

Temperatures

Flash Point

Pour Point

ACAT 400

PAO

320/460

> 140

-30 °C to +180 °C

> 240 °C

-35 °C

No reviews

Attachments

Product added to wishlist
Product added to compare.