Maxigras 101/2

Maxigras 102/2

7076250

Lubricating grease formulated with state-of-art thickener Calcium Sulfonate Complex. Specially designed to work under extreme situations of loads, shock, presence of moisture and possible chemical attack.

Available in
  • 5 Litres (4x5L)
  • 20 Litres
  • 50 Litres
  • 200 Litres
 

APPLICATIONS:

  • Bearing lubrication under high loads.
  • Rolling mills in steel industry.
  • Bearings in the presence of moisture and / or elevated temperatures.
  • Paper industry, mining, construction equipment.
  • Electric motors, journal and antifriction bearings, mechanical elements in the presence of acids or alkalis, saline environments and / or corrosive.

PROPERTIES AND ADVANTAGES:

  • Excellent performance under extreme conditions and shock loads. High capacity EP.
  • Protection against corrosion and oxidation.
  • High resistance to cold or hot water wash, either fresh water or seawater.
  • Excellent adhesion, high resistance to dripping / draining.
  • Excellent pumpability under -30ºC, allowing its use in situations of low temperature.
  • Thanks to its complex thickener technology, it provides high continued workability at elevated temperatures, with an excellent recovery of the consistency once it cools.
  • Excellent mechanical resistance against continued effort, minimal changes in consistency.


SPECIFICATIONS:

CLASSIFICATION / GRADE

NLGI 2

DIN 51502

KP2R-30

ISO 6743/9

L-XCFIB-2


TECHNICAL DATA:

CHARACTERISTICS

STANDARD

VALUE

Type of thickener

ASTM D218

Sulfonate complex

Nature base oil

ASTM D218

Semi synthetic

Color

Visual

Brown

Consistency (Grade NLGI)

DIN 51818

2

Dropping point, ºC (ºF)

ASTM D-2265

> 300 (+572)

Penetration not worked @ 25ºC, x 0,1 mm

ASTM D217

280

Penetration worked (60 strokes) @ 25ºC, x 0,1 mm

ASTM D217

282

Penetration loss:
     After 105 strokes, 25ºC, (77ºF) %

ASTM D217

+13 points (295 x 0,1 mm)

Loss of fat penetration with 10% water:

After 105 strokes, 25ºC, (77ºF) %

ASTM D217

+16 points (298 x 0,1 mm)

Copper corrosion, 24h, 100ºC

ASTM D-4048

1b

4-ball EP test, welding, kg

ASTM D-2596

> 700

Test Wear 4 balls
    (40 Kg / 1200rpm / 75ºC / 1h), Footprint (mm)

ASTM D-2266

< 0,3

Pumpability at -30ºC (hPa)

DIN 51805

1103

Application temperatures in service, ºC

-35 a +180

Olipes retains the right to modify the data herein without previous notice.

Attachments

Product added to compare.