Flow P.O. 68

Flow P.O. 68

Flow P.O. 68 is a multifunctional lubricating oil in highly refined mineral base and state-of-the-art additives.
Available in
  • 20 Litres
  • 200 Litres
Flow P.O. 68 is a multifunctional lubricating oil in highly refined mineral base and state-of-the-art additives. Specially developed for the lubrication of industrial use closed gear systems. Its advanced formula provides extraordinary capacity for withstanding loads (Extreme Pressure properties ).
Properties and Advantages:
- Minimal foaming, reducing the cavitation phenomenon in the lubrication of plain bearings.- Reduced tendency to form deposits, keeping the components in a completely clean state, prolonging their useful life.
- Excellent thermal stability.
- Rapid separation of water, preventing moisture on metal surfaces.
- Superior anti-wear, anti-rust and anti-corrosion capability, protecting pumps and components.
- Reduces frictional power losses, ensuring optimum performance and quiet operation.
- Its excellent Extreme Pressure make it suitable for use in loaded features.
- Excellent filtrability.
- Compatible with frequently-used joints and seals.
- Circulation systems for the lubrication of closed gears for industrial use, plain bearings, guides and bearings where a lubricant with EP properties is required.
- Lubrication of features with shock and / or sliding loads.
- Hydraulic systems operating at high pressures and / or high temperatures.
- Hydraulic controls, presses, cranes, booms.
- Transmissions and hydraulic couplings.
Specifications / Quality Level:
Gears Hydraulic systems
DIN 51517 Part 3 CLP DIN 51524 Part 2 (HLP)
US STEEL 224 AFNOR NF E 48-603 (HM)
AGMA 9005-D94 EP DENISON HF-0, HF-1, HF-2
DAVID BROWN S1.53.101-E ISO 11158 (HM), ISO 6743/4 (HM)
ISO 12925-1 CKC-CKD SEB 181222
SEB 181226 FIVES CINCINNATI: P-68 (HM-32), P-69 (HM-68), P-70 (HM-46)


Technical data:

Physio-chemical characteristics Standard Value
Grade ISO ISO 3448 68
Kinematic viscosity at 40 ºC, Typical (cSt) ASTM D-445 68
Min. viscosity index ASTM D-2270 100
Density at 15°C, Typical (kg/l) ASTM D-1298 0,880
Freezing point (ºC), máx. ASTM D-97 -15
Flash point COC, mín. (ºC) ASTM D-92 220
Copper corrosion (3h, 100ºC), máx. ASTM D-130 1b
FZG, (A/8.3/90), Stage DIN 51354/2 12
FAG FE-8 (D-7.5/80-80), wear, (mg) DIN 51819/3 <30
TIMKEN load (lb) ASTM D-2782 >60
Test, 4 balls, welding (kg) ASTM D-2596 250
Wear test, 4 Balls, Track (mm) ASTM D-2266 <0,4
No reviews


Product added to wishlist
Product added to compare.