Maxigear Atox 150

Maxigear Atox 150

7196820
Fully synthetic, non-toxic oil. Especially formulated with bases and additives in the right proportions to comply with the requirements of the food industry, standard H1 for lubricants in indirect contact with foodstuffs. Especially designed for lubricating gears and mechanisms in the food and/or pharmaceutical industry.

Available in
  • 20 Litres
  • 200 Litres
 

APPLICATIONS:

  • Gears of all kinds under sealed case.
  • Piston, vane and blower compressors; vacuum pumps and hydraulic groups that require high viscosity oils.
  • Greasing of bearings, plain and anti-friction bearings under crankcase or by circulation systems in closed circuits.
  • Transmission chains.
  • General lubrication of mechanical elements in the food and pharmaceutical industries.

ADVANTAGES:

  • Good capacity to support medium or slightly heavy loads and great range of working temperatures.
  • Low coefficient of friction and greater wear protection, which together with better thermal conductivity and heat evacuation capacity generate lower working temperatures compared to conventional mineral oils.
  • Its low coefficient of friction reduces operating temperature, improves gear performance, and consequently reduces energy consumption.
  • Excellent resistance to thermal degradation, aging and oxidation, avoiding the formation of harmful oxidation products, even at high temperatures, maintaining excellent anticorrosive power.
  • Reduced deposit formation, keeping the gears in an optimal state of cleanliness.
  • ü  Its high viscosity index results in a minimal variation in viscosity against changes in temperature.
  • High adherence and smoothness.
  • Excellent fluidity at extreme low temperatures, which makes it especially useful in freezing systems and industrial cold stores.
  • Compatible with elastomers (NBR, FPM), gaskets, seals and paints used in machinery for food manufacturing and packaging.

SPECIFICATIONS / QUALITY LEVEL

INDUSTRIAL GEARBOXES

HYDRAULIC SYSTEMS

DIN 51517/1 to 3: C, CL and CLP

DIN 51524/2: HLP

ISO 12925-1: CKB and CKC;   ISO 6743/6: CKB and CKC

ISO 11158: HM;   ISO 6743/4: HM

AGMA 9005-E02: EP ; DAVID BROWN: S1.53.106

 

  

APPROVALS:

-     Category Code H1

-     NSF Registration No.: 141981

 

TECHNICAL DATA:

PHYSICOCHEMICAL CHARACTERISTICS

STANDARD

150

ISO grade

ISO 3448

150

Viscosity at 40 °C (cSt)

ASTM D-445

135-165

Viscosity at 100 °C (cSt)

ASTM D-445

17-20

Viscosity Index; min.

ASTM D-2270

140

Flash point, ºC, min

ASTM D-92

240

Pour point, ºC, max

ASTM D-97

-40

4-ball AW test

(40 Kg/1200rpm/75ºC/1h), scar mm

ASTM D-2266

< 0.35

FZG test (load phase pass)

DIN 51354/2

>12

Copper corrosion (3h, 100 °C), grade max.

ASTM D-130

1a

8436044741166
No reviews

Attachments

Product added to wishlist
Product added to compare.