Page 4 - Olipes Mineria

GREASES Applications Benefits Dropping Point Operating Temperature Specifications LUBRICATING OILS

MAXIGRAS C45 EP EP (Extreme Pressure) Multipurpose grease formulated It reduces lubrication frequencies compared to conventional lithium ≥200 °C (+392 °F) -20 °C → +135 ºC DIN 51502: KP2K-20 ENGINE Benefits Specifications *
for the general lubrication of CV joints, ball and socket greases, optimising maintenance costs by reducing costs due to -4 °F → +275 ºF ISO 6743/9: L-XBCEB-2

joints, pins, universal joints, bearings, electric motors, mechanical or lubrication interventions. AVEROIL 5W30 UHP Fully Synthetic Mid-SAPS technology ‘FE + LD’ (Fuel Economy + Long Drain) for API CJ-4 │ ACEA E6/E7/E9

vehicle chassis, etc. High anti-wear (AW), Extreme Pressure (EP) anticorrosive, antioxidant use in all types of engines, specially for long distance, providing savings in fuel CAT ECF-3/2/1A
Available in NLGI consistency numbers 00; 000; 1; 2 and 3. and anti-rust power. MAXIGRAS greases consumption and very long intervals between oil changes. CUMMINS CES 20081

Data corresponding to NLGI consistency number 2 Compatible with exhaust after-treatment systems (SCR + EGR + DPF). DEUTZ DQC-IV-10 LA
MTU Type 3.1
EURO VI engines and earlier.
MAXIGRAS COMPLEX EP EP grease with a characteristic blue colour, formulated Exclusive bases and nanotechnology of the additives used in its exclusive ≥285 °C (+545 °F) -30 °C → +160 °C (+180 ºC) DIN 51502: KP2P-30 protect your machinery

with a high-viscosity base oil and the latest generation of formula give it high mechanical stability and a high dropping point that -22 °F → +320 °F (+356 °F) KP3P-30 AVEROIL 10W40 UHP Fully Synthetic Mid-SAPS technology ‘LD’ (Long Drain) for use in all types of API CI-4 │ ACEA E6/E7/E9

anti-wear (AW) and extreme pressure (EP) additives. allows the lubrication frequencies to be reduced by up to 80% ISO 6743/9: L-XCEHB-2/3 with the utmost guarantee engines, heavy vehicle engines operating in severe service conditions and CUMMINS CES 20076/20077
very long oil change intervals.
Recommended for lubricating bearings and bolts in heavy compared to conventional lithium greases. DEUTZ DQC-IV-10 LA

machinery and wheel hubs. High anti-wear (AW) and extreme pressure (EP) capacity, even at high thanks to the exclusive Compatible with exhaust after-treatment systems (SCR + EGR + DPF). MACK EO-N
Available in NLGI consistency numbers 2 and 3. working temperatures. High adhesion and tackiness. EURO VI engines and earlier. MTU Type 3.1

MAXIGRAS 110 EP/220 Water resistant EP grease, formulated with high viscosity Increases lubrication periods, reducing maintenance costs ≥220 °C (+428 °F) -30 °C → +140 °C (+165 °C) DIN 51502: KP2N-30 manufacturing technology AVEROIL 15W40 FAP Mid-SAPS ‘EODI’ (Extended Oil Drain Interval) high-performance synthetic technology API CJ-4 │ ACEA E7/E9
for engines operating in harsh conditions in off-road machinery, agricultural
CAT ECF-3/2/1A

base oil and the latest generation of anti-wear (AW) and thanks to its high anti-wear, anti-corrosion, antioxidant and -22 °F → +284 °F (+329 °F) ISO 6743/9: L-XCDEB-2 machinery and construction trucks. Specially recommended for CAT engines.
extreme pressure (EP) additives. anti-rust power. High adhesion and greasiness and great developed by OLIPES. Compatible with exhaust after-treatment systems (SCR + EGR + DPF). CUMMINS CES 20081
Recommended for lubricating bearings and bolts in heavy mechanical stability with minimum oil separation at high DETROIT DIESEL 93K218
machinery, wheel hubs and mechanisms in general. temperatures, even in humid environments or in the presence of Euro V, VI, EU Stage IV, and US EPA Tier 4 Final & Power Gen Tier 4 for Heavy-Duty MACK EO-O Premium Plus
VOLVO VDS-4
CI Engines (LHDDE, MHDDE, and HHDDE) engines and stationary engines.
Available in NLGI consistency number 2. fresh or salt water or steam.
Excellent pumpability at low temperatures.
AVEROIL GLOBAL Available in SAE 10W40 semi-synthetic and SAE 15W40 mineral viscosities. SHPD API CI-4 │ ACEA E7
‘EODI’ (Extended Oil Drain Interval) lubricants for engines operating in harsh CAT ECF-2/1A
MAXIGRAS 102 EP Calcium Sulfonate Complex grease, totally insoluble in Excellent performance in extreme conditions of shock, temperature >300 °C (+572 °F) -30 °C → +180 °C DIN 51502: KP2R-30 conditions in off-road machinery, agricultural machinery, construction, delivery, CUMMINS CES 20076/20077
ISO 6743/9: L-XCFIB-2
-22 °F → +356 °F
and long distance trucks. Recommended for mixed fleets.
water and steam, formulated with a meticulous selection of
and vibration loads in the presence of water, even salt water or steam.
synthetic oils of very high viscosity and easy cold pumpability. High EP capacity. Protects against corrosion and oxidation. Compatible with exhaust after-treatment systems (SCR + EGR). Incompatible DETROIT DIESEL 93K215
DEUTZ DQC-III
Recommended for the extreme lubrication of construction High resistance to washing with water. with Particulate Filters (DPF). MTU Type 2
machinery such as public works, quarries, road and EURO V and earlier, EU Stage III A, and US EPA TIER 3 without DPF engines.
maritime transport, etc., in the presence of salt water and Excellent adhesion over a wide temperature range (-30 °C to +180 °C)
high temperatures. without dripping.
Available in NLGI consistency numbers 0; 1 and 2. Excellent cold pumpability and high mechanical stability. Data corresponding to NLGI consistency number 2 AVEROIL 15W40 TIR Mineral SHPD (Super High Performance Diesel) recommended for the API CG-4 │ ACEA E3
lubrication of turbocharged and naturally aspirated engines with standard oil
CAT ECF-2/1A
change intervals in off-road, agricultural, power generators, construction, CUMMINS 20075
MAXIGRAS 46 High mechanical stability EP grease with solid High anti-wear (AW) and extreme pressure (EP) capacity thanks to the ≥210 °C (+410 °F) -20 °C → +120 °C (+140 °C) DIN 51502: MPF2K-20 delivery, and long-haul trucks. MTU Type 2.1
additives (contains MoS 2 ), with characteristic black laminar lubrication of its solid additives that reduce friction and wear of -4 °F → +248 °F (+284 °F) KPF2K-20 Compatible with EGR valves. Incompatible with SCR catalytic converters and
colour. Its formulation includes cutting-edge anti-wear the surfaces in contact. ISO 6743/9: L-XBCEB-2 Particulate Filters (DPF).
(AW) and extreme pressure (EP) additives. They reduce pitting and scuffing in elements subjected to heavy loads EURO III and earlier, EU Stage II, and US EPA Tier 2 engines.
Available in NLGI consistency numbers 2 and 3. and vibrations.
Data corresponding to NLGI consistency number 2 HYDRAULIC AND HYDROSTATIC TRANSMISSIONS
MAXIGRAS COMPLEX M EP Multipurpose grease formulated with a high viscosity Provides maximum protection against extreme loads. >280 ºC (+536 ºF) -20 °C → +160 °C (+180 °C) DIN 51502: KPF2P-20 MAXIFLUID BBO, HLP, A range of highly refined and microfiltered anti-wear hydraulic fluids with AFNOR FNHA
HVLP, HV, HVSC,
improved viscosity index. Available in a wide range of viscosities, formulated to
ISO
BOSCH
-4 °F → +320 °F (+356 °F)
ISO 6743/9: L-XBEHB-2
base oil and reinforced with anti-wear (AW) and extreme
pressure (EP) solid additives. Maximum adhesion to lubricated metallic surfaces, even in the POC-55, HD exceed the most demanding specifications of major manufacturers (OEM), for CASE KOMATSU
presence of heavy loads, vibrations and high temperatures,
Recommended for lubricating bolts and ring gears in generating a protective barrier against external pollutants (ISO VG: 32, 46 o 68) maximum performance and maximum power in the most adverse conditions. CAT MF
heavy machinery and mining. (water, dust). Consult our Technical Support Service for correct product selection. CINCINNATI POCLAIN
Available in NLGI consistency numbers 2 and 3. DENISON VICKERS
DIN ZF
MAXIGRAS COMPLEX PICK Complex thickener EP grease, formulated with a high Excellent anti-seize capability. It reduces friction and operating >280 °C (+536 °F) -20 °C → +270 °C DIN 51502: MPF2/3R-20
temperature, protecting the point chisel of the hydraulic hammer at
-4 °F → +518 °F
viscosity base oil and reinforced with solid anti-wear (AW)
and Extreme Pressure (EP) additives and high micronised the moment of greatest load, extending its working life and reducing MANUAL AND AUTOMATIC TRANSMISSIONS, AXLES, TDTO, STOU, AND UTTO
copper content. maintenance operations. MAXICER TO-4 Mineral, semi-synthetic and synthetic oil ranges for manual gearboxes, ALLISON KUBOTA
Specially designed for hydraulic breaker hammer picks of Maximum lubricity, adhesion, and resistance to dripping/leaking, MAXIFLUID ATF electronically-controlled manual gearboxes, manual gearboxes with converters API LIEBHERR
small and large size. resistance to washing with cold or hot water, and protection against MAXIGEAR (automatic), axles, oil-immersed brakes, final drives, and all types of CASE MF
Available in NLGI consistency number NLGI 2/3. oxidation and corrosion. Temperature of dry lubricant layer: +1100 ºC (+2012 ºF) MAXITRACTOR transmissions. Available in a wide range of ISO and SAE viscosities, CAT MIL
manufactured according to the quality standards of major manufacturers FNHA POCLAIN
MAXIGRAS 70 Anti-seize grease reinforced with solid anti-wear (AW) It forms a highly resistant metal film with excellent thermal conductivity ≥260 °C (+500 °F) -20 °C → +370 °C DIN 51502: MPF1R-20 (OEM) with original warranty. JOHN DEERE VCE
and Extreme Pressure (EP) additives and high micronised that repels water, protects against corrosion and withstands high loads -4 °F → +698 °F Consult our Technical Support Service for correct product selection. KOMATSU ZF
copper content. and tightening torques, avoiding seizing of the threaded joints,
Specially designed for lubricating threaded joints of drill facilitating their disassembly. COMPRESSORS AND REDUCERS
rods and electrical contacts. Excellent pumpability, even at low temperatures.
Available in NLGI consistency numbers 0; 1 and 2. Maximum cleaning of automatic lubrication circuits. Data corresponding to NLGI consistency number 1 FLOW CP/FR/SYN CP A range of highly refined and dewaxed mineral oils, synthetic oils (Ester, Compressors
PAG, PAO) and biodegradable oils for all types of oil-lubricated gearboxes DENISON
MAXIGRAS 50 GEAR ‘Long-life’ fluid EP grease, high apparent viscosity. Excellent tackiness and adhesion, protects against corrosion, ≥220 °C (+428 °F) -20 °C → +150 °C DIN 51502: OGP0N-20 and compressors (alternative and rotary) and vacuum pumps. Available in DIN 51506
a wide range of viscosities.
Formulated with semi-synthetic bases and EP additives. withstands strong continuous and impact loads in aggressive media -4 °F → +302 °F ISO 6743/9: L-XBDHB-0 FLOW CP, FR, SYN CP and OLIOL are recommended for compressors by ATLAS ISO 6521 / 6743
Recommended for the lubrication of open gears, lift and (exposure to sun, moisture, dust, vibrations), even on telescopic slides FLOW PO COPCO, BLISSFIELD, CARRIER, COMPAIR, DUNHAM-BUSH, GARDNER DENVER, Reducers
crane guides, slides, cables, and steel chains. with Teflon skids. MAXIGEAR ATOX/BBO/SYN INGERSOLL-RAND, KAESER, SABROE, SULLAIR, TRANE, WORTHINGTON... AGMA
Available in NLGI consistency number NLGI 0. Easy cold pumpability. Resistant to washing with water. OLIOL Consult our Technical Support Service for correct product selection. CINCINNATI
DAVID BROWN
DIN 51517
MAXIGRAS 94 OGL Pseudoplastic EP grease with high apparent viscosity Maximum protection against shock loads. High EP capacity. Free of >190 °C (+374 °F) -10 °C → +120 °C (+140 ºC) DIN 51502: OGPF0/00N-10 ISO 12925-1
and low environmental impact, with high colloidal thinners, chlorine, lead, heavy metals, and asphalt. +14 °F → +248 °F (+284 ºF) ISO 6743/9: L-XADHB-0/00 US STEEL
graphite content, for the lubrication of open gears. High resistance to washing with water. Protects against corrosion. AGMA: CG-1, 2 & 3 Type
Recommended for large drives in the extraction and Maximum adhesion even at high temperatures. Reduces the micro-pitting DRILLING
treatment of aggregates, cement, quarries and open effect by protecting the flanks of the gear teeth and facilitating the
gears subject to high stresses. removal of contaminants on the contact surfaces. FLOW HAMMER Available in a wide range of viscosities, the FLOW HAMMER range offers ATLAS COPCO
Available in NLGI consistency number 0/00. Easy pumpability at low temperatures. Temperature of dry lubricant layer: +250 ºC (+482 ºF) maximum protection for drilling tools in all weather conditions: GARDNER DENVER
FLOW HAMMER 100 is recommended for low temperatures (-20 °C to +10 °C/ HOLLMAN
MAXIGRAS 49 WR Semi-synthetic pseudoplastic lubricant high-viscosity and It easily penetrates inside the cable, lubricating its fibres from the inside, >250 °C (+482 °F) -20 °C → +150 °C DIN 51502: KPFHC1N-20 -4 °F to +50 °F ) and low to medium pressures (0-17 bar). INGERSOLL RAND
adhesion, reinforced with solid additives, capable of
-4 °F → +302 °F
avoiding metal-to-metal contact, thus reducing wear and tear, even
ISO 6743/9: L-XBDIB-1
providing optimum elastohydrodynamic lubrication. under poor lubrication conditions. FLOW HAMMER 150 is recommended as an all-weather option (-10 °C to +20 °C/ ISO 6743-11 PAC & PBC
+14 °F to +68 °F ) and low to medium pressures (0-17 bar).
JOY (RD01)
Specially designed for the lubrication of wire ropes in the Its proven resistance to acidic substances and water washing protects TAMPELA
most severe working conditions, in aggressive the cable from corrosion in extreme situations of environmental pollution FLOW HAMMER 220 is the quintessential drilling lubricant thanks to its versatility: it is
environments: marine, mining, elevators, construction in saline atmospheres. recommended for low temperatures (-10 °C to +10 °C/+14 °F to +50 °F ) and high TAMROCK
machinery, etc. pressures (17-28 bar); in all weather (0 °C to +20 °C/+32 °F to +68 °F) and low to
medium pressures (0-17 bar); for high temperatures (+10 °C to +50 °C/
Available in NLGI consistency number 1/2. OLIPES high-performance lubricants with +50 °F to +122 °F) and low pressures (0-10 bar).
MAXIGRAS 3000 BBO Biodegradable Multipurpose ‘long-life’ EP (Extreme Excellent biodegradability and low environmental impact. Very good ≥240 °C (+464 °F) -40 °C → +120 °C (+140 ºC) DIN 51502: KPE2K-40 cutting-edge additives.
Pressure) grease, formulated with synthetic bases and
adhesion, tackiness, lubricity and resistance to washing with water with
additives with low environmental impact. maximum protection against corrosion. -40 °F → +248 °F (+284 °F) ISO 6743/9: L-XDCEB-2 The temperature ranges indicated for each product are the result of our experience in the sector and
establish average values and standards of use. For a correct use of our products, always follow the
Recommended for general lubrication of chains, cables, Its high EP capacity and low friction coefficients contribute to reduced The best choice for your machinery. recommendations of the machinery manufacturer in terms of use temperatures, pressures, viscosities
flanges and tracks, gates and other mechanical wear and noise levels in lubricated elements. and working conditions. If in doubt, consult our technical department.
elements.
Available in NLGI consistency numbers 1 and 2. Data corresponding to NLGI consistency number 2 * The most significant specifications for the sector have been detailed in this catalogue.
For more information, scan the product QR code or visit www.olipes.es