English 
Español
Français
Português
Averoil 5W30 C3
7106701
Fully synthetic lubricant oil of high quality, formulated with last generation additives LOW SAPS specially designed to extend the life of existing systems to reduce emissions in diesel and gasoline vehicles.
It has a low ash content, sulfur and phosphorus, essential characteristics for optimal lubrication and excellent performance in Euro V and Euro VI engines and proved compatibility with after treatment systems SCR, EGR and Gasoline Catalytic Converters (CAT), especially those that incorporate Diesel Particulate Filters (DFP / FAP).
PROPERTIES & ADVANTAGES
- Thanks to its formulation, it offers a high degree of detergency, dispersancy and anti-wear, prolonging the life of the lubricated components and increasing the intervals between oil changes (Extended Drain) keeping clean the vital elements of the motor and avoiding the formation of deposits, lacquer or varnish.
- Excellent cold start, allowing an immediate movement of the oil at low temperatures. Reduced coefficient of friction appropriate to reduce fuel consumption.
- High thermal stability and resistance to chemical degradation.
APPLICATIONS
- Especially recommended for high performance, both diesel and gasoline vehicles, with modern engines equipped with special particulate filters.
- Essential lubricant for vehicles with DFP / FAP filters in order to achieve the estimated length by the manufacturer.
- Compatible with new engines Euro 5, Euro 6 and before.
SPECIFICATIONS / QUALITY LEVEL:
|
ACEA: C3 |
MB: 229.31 / MB 229.51 / MB 229.52 |
|
API: SN / SM / CF |
RENAULT: RN17 / RN 0700 ** |
|
BMW: Long Life-04 |
VW:502.00*/505.01* |
|
GM/OPEL:DEXOS 2 TM * |
|
|
Also suitable for engines requiring ACEA C2. |
|
|
*Compatible also with engines with specifications VW 501.01 y 505.00. |
|
|
** Compatible with engines requiring RN0700. |
|
*Registered trademark of General Motors, use for information purposes.
TECHNICAL DATA:
|
PHYSICOCHEMICAL CHARACTERISTICS |
STANDARD |
VALUE |
|
SAE grade |
SAE J300 |
5W30 |
|
Viscosity at 100 ºC (cSt) |
ASTM D-445 |
9.3 – 12.5 |
|
Pour point (ºC) |
ASTM D-97 |
< - 35 |
|
Flash point (ºC) |
ASTM D-92 |
> 210 |
|
Viscosity at -30 ºC, cPs |
ASTM D-5293 |
< 6600 |
|
HTHS viscosity, mPa.s, 150ºC |
ASTM D-4683 |
> 3,5 |
|
NOACK volatility, at 250 ºC, max (% weight loss) |
ASTM D-5800 |
13 |
|
TBN (mg KOH/g) |
ASTM D-2896 |
> 6,0 |
|
Sulfated ash (% weight) |
ASTM D-874 |
≤ 0.8 |
8436044748622
No reviews
Attachments
Tap to zoom
