English 
Español
Français
Português
Flow Hammer 100 BBO
7750520
Flow Hammer 100 BBO is a biodegradable drilling lubricant oil (over 80% in the CEC L-33-A-93 test).
PROPERTIES & ADVANTAGES:
- They have properties of extreme pressure, anti-wear, anti-rust and anticorrosive, being also reinforced with smoothness agents that remarkably improve their lubricating properties.
- They have excellent resistance to washing through humidity, providing maximum protection when drilled with water.
- Reducing the potential environmental damage to surface and ground aquifers, as well as drilled ground during mining production in mineral exploration, construction of roads and underground pipelines, quarries, water well drilling and oil and gas exploration.
- They have excellent resistance to washing through humidity, providing maximum protection when drilled with water.
- Reducing the potential environmental damage to surface and ground aquifers, as well as drilled ground during mining production in mineral exploration, construction of roads and underground pipelines, quarries, water well drilling and oil and gas exploration.
APPLICATIONS:
- Products specifically formulated for the lubrication of compressor hammers, air hammers, drill cars, burins and other pneumatic or hydraulic tools.
- Hammer drills with pneumatic percussion drive in the bottom and at the head.
- Use in line lubricators or as lubricant applied through the drill.
- Hammer drills with pneumatic percussion drive in the bottom and at the head.
- Use in line lubricators or as lubricant applied through the drill.
QUALITY LEVEL / PERFORMANCE:
Quality level according to the ISO 6743-11 PAC, PBC standard.
TECHNICAL DATA:
| Physio-chemical characteristics | Standard | Value | ||
| Grade ISO | ISO 3448 | 100 | ||
| Density at 15°C, Typical (kg/l) | ASTM D-1298 | 0,930 | ||
| Viscosity index, mín. | ASTM D-2770 | 160 | ||
| Freezing point (ºC), máx. | ASTM D-97 | -25 | ||
| Flash point COC, mín. (ºC) | ASTM D-92 | 260 | ||
|
Corrosion test - Distilled Water (A) - Sea Water (B) |
ASTM D-665 ASTM D-665 |
Pass Pass |
||
| Biodegradability, %, mín. | CEC L-33-A-93 | 80 | ||
| Test, 4 balls, welding load, (27ºC, 1700 rpm) | IP-239 | 250 | ||
| Wear test , 4 balls, (40 kg/1200 rpm/75ºC/1h), mm | ASTM D-4172 | <0.4 | ||
No reviews
Attachments
Tap to zoom
