Flow Hammer 150
Lubricating oils for pneumatic and drilling tools formulated with highly refined mineral bases and adhesion, emulsifier, corrosion and rust inhibitor, anti-wear and extreme pressure additives, specifically selected for lubrication in drilling operations, including use in severe water washing conditions.
PROPERTIES & ADVANTAGES
-
Its high capacity to withstand loads and anti-wear protection prolongs the service life of the equipment and reduces maintenance costs.
-
Maximum protection against corrosion, including in the presence of moisture or water washing, due to the product´s excellent adhesion properties and great capacity to emulsify and trap water, thereby preventing water from entering into contact with metallic surfaces.
-
Highly resistant lubricating film, even when lubricating pneumatic impact drills.
-
Excellent thermal stability, reducing the formation of sludge and deposits in valves and other components.
-
Contains unctuous agents and additives designed to improve lubricity.
-
Its excellent extreme pressure properties make it suitable for use in strongly loaded elements.
-
Its service life surpasses 3,000 working hours in the most adverse conditions.
APPLICATIONS
-
Lubrication of compressor hammers, pneumatic hammers, drilling wagons, burins and other pneumatic-type tools used in the mining and construction sectors.
-
Quarry drills.
-
Top and down-the-hole pneumatic percussion drilling hammers.
-
Use in line lubricators and as a lubricant applied using a rock drill.
SPECIFICATIONS / QUALITY LEVEL
Quality level in accordance with ISO 6743-11 PAC, PBC.
Complies with the quality requirements of the top manufacturers:
GARDNER DENVER |
INGERSOLL RAND |
TAMPELA |
JOY (RD01) |
ATLAS COPCO |
HOLLMAN |
TECHNICAL DATA
PHYSICOCHEMICAL CHARACTERISTICS |
STANDARD |
VALUE |
ISO grade |
ISO 3448 |
150 |
Viscosity at 40 ºC, typical (cSt) |
ASTM D-445 |
135 - 165 |
Density at 15 ºC, typical (kg/l) |
ASTM D-1298 |
0.890 |
Pour point (ºC), max |
ASTM D-97 |
-20 |
COC flashpoint, min (ºC) |
ASTM D-92 |
230 |
Copper corrosion (3h, 100 ºC), max |
ASTM D-130 |
1b |