Flow Syn CP 68
7195820
100% synthetic lubricant made from Polyalphaolefin (PAO) oil - ester and ashless additives, especially for the lubrication of air compressors, vacuum pumps, hydraulic systems and general lubrication where oils with these viscosity grades are required.
PROPERTIES & ADVANTAGES:
- Excellent resistance to oxidation (overpasses the Pneurop Oxidation Test) and very high thermal and chemical stability.
- With a very low tendency to the formation of sludge, lacquers, deposits and carbonaceous residues, it minimizes the formation of residues in valves and pistons, avoiding the risk of explosions and fires.
- Its high flash point and low volatility provide greater safety and reduce product consumption.
- It allows very long change intervals of (up to 8,000h or more in screw compressors), reducing product and maintenance costs.
- Wide range of working temperatures.
- Low coefficient of friction and greater wear protection, which together with better thermal conductivity and heat evacuation capacity generates lower working temperatures compared to conventional mineral oils.
- High anti-rust and anticorrosive power, minimal foam formation and excellent demulsification capacity.
- Compatible with commonly used gaskets and seals, as well as mineral oils and other compatible synthetics.
APPLICATIONS:
- Lubrication of all types of air compressors: rotary (vanes, centrifugal or screw) and alternative (piston, mono or multistage), either static or portable, operating at compression / discharge temperatures of up to 220 °C and pressures above 10 bars.
- The ISO VG viscosities 32, 46 and 68 are those commonly used in rotary compressors (46 in Screw).
- The ISO VG viscosities 100 and 150 (SAE 30 and 40) are those commonly used in reciprocating compressors.
- Exceptional filterability, its zinc-free additive package allows it to be used in hydraulic systems where ash-free fluids are required, avoiding the formation of sludge in very low-micron filters as well as the formation of lacquers in servo valves and actuators, being valid for greasing reducers under normal load conditions.
SPECIFICATIONS / QUALITY LEVEL:
Quality level according to the ISO 6743-11 PBD standard.
COMPRESSORS |
HYDRAULIC SYSTEMS |
DIN 51506: VCL and VDL |
DIN 51524 Parte 2 (HLP) |
ISO 6521-1: DAC and DAJ ISO 6743/3: DAC and DAJ |
ISO 11158 (HM) ISO 6743/4 (HM) |
TECHNICAL DATA:
PHYSICOCHEMICAL CHARACTERISTICS | STANDARD | VALUE |
Grade ISO | ISO 3448 | 68 |
Viscosity at 40ºC (cSt) | ASTM D-445 | 62-74 |
Viscosity at 100ºC (cSt) | ASTM D-445 | 9.5-11 |
Min. viscosity index | ASTM D-2270 | 120 |
Density at 15ºC, Typical (kg/l) | ASTM D-1298 | 0.840 |
Freezing point (ºC) Máx. | ASTM D-97 | -50 |
Flash point COC (ºC) | ASTM D-92 | >230 |
Sulphated ash (% wt) | ASTM D-874 | <0,01 |
Foam Test: (Seq. I/II/III, Max. Format) | ASTM D-892 | 50 |
Copper corrosion (3h, 100ºC), Degree | ASTM D-130 | 1a |
8436551580760
No reviews