Page 15 - Olipes Industrial Maintenance

Mechanisms which are small in size or difficult to reach

MAXIGRAS 94 OGL
Complex Aluminium Fluid Grease with EP properties and a high viscosity (ISO 1000) base
oil. High content of extremely pure colloidal graphite.
AGMA Type CG-1/CG-2/CG-3* NLGI 0/00 DIN OGPF 0/00N-10
ISO-L-XADHB-00 -10ºC to +120ºC (+140ºC)**
High temperatures, vibrations, speed and high loads.
Available in spray

MAXIGRAS 593
Grease with PTFE H1 for the Food Industry. Approved by the NSF in accordance with the
criteria established under the FDA as H1 type lubricant: “Lubricants susceptible of entering into
accidental contact with food”. High degree of adherence and protection against oxidation
and corrosion. Ideal for the lubrication of bearings, gears and machinery rails. Contains EP
and PTFE additive to support large dynamic and sliding loads, including in extreme working
conditions and temperatures.
NLGI 2 DIN 51502 KPF2P-30 ISO-L-XCEIB-2 -30ºC to +160ºC
Available in spray

MAXIGRAS CADENAS
SPRAY grease with excellent lubricating power with EP and PTFE additives.
Excellent penetration and adherence. Anti-wear and sealing effect properties.
Withstands high dynamic and sliding loads.
Available in spray
-35ºC to +150ºC

HIGH
High temperatures and high loads TEMPERATURES
VISCOFLOW 300
Highly adherent SYNTHETIC lubricant (HONEY GREASE), especially
recommended for graphic arts (MAN-ROLAND, HEILDELBERG, KBA, etc), the
textile industry (dryer chains), the paper, timber and manufacturing industry,
and applications which require chain lubricants with extremely high viscosity
and very low evaporation. Recommended for the lubrication of heavily
loaded low-speed chains.
DIN:51517/3-CLP ISO: 3498-CKC US STEEL:224 Viscosity: 300 cSt at 100ºC

MAXIGRAS 49 WR

Pseudo-plastic lubricant with solid additives and EP properties.
High-viscosity (ISO 680) semi-synthetic oil base. Semi-fluid
consistency.
AGMA Type CG-1 NLGI 1 DIN KPFHC1N-25 ISO-L-XBDIB-1
-25ºC to +150ºC** Dynamic Viscosity (cPs at 25ºC): 500,000
Maximum adherence and protection including at high
temperatures, with vibrations, moisture and in aggressive
environments.

* NLGI grade in accordance with Type CG-1/CG-2
** Maximum operating temperature of the lubricant film (solid additives): + 250º C
13