Page 13 - Olipes Industrial Maintenance

New drives in the running-in phase

SPRAY or SPLASH lubrication
MAXIGRAS 94 OGL/R
Complex Aluminium EP high-viscosity (base oil ISO 1000) grease with an
extremely fluid consistency. High content of high purity colloidal graphite
and MoS2.
NLGI 00 DIN OGPF00N-10 ISO-L-XADHB-00 -10ºC to +140ºC**
A grease specifically designed for SPRAY and/or SPLASH lubrication systems
for new drives in the RUNNING-IN phase. Its formulation guarantees a
perfect running-in by means of the plastic deformation of the contact
surfaces using a lubricant film which is highly resistant to extreme pressures
and of the action of its additives, which prevent the polished surface
effect, thereby increasing the service life of the lubricated parts.

Drives subjected to high loads

SPRAY or SPLASH lubrication
MAXIGRAS 94 OGL

Complex Aluminium Fluid Grease with EP properties and a high viscosity
(ISO 1000) base oil. High content of extremely pure colloidal graphite.
AGMA Type CG-1/CG-2/CG-3* NLGI 0/00 DIN OGPF 0/00N-10
ISO-L-XADHB-00 -10ºC to +120ºC (+140ºC)**
Recommended for the SPRAY and/or SPLASH – FERRIS WHEEL lubrication
and MANUAL greasing of large drives requiring the use of fluid greases.

SPLASH lubrication
MAXIGRAS 94 OGL/F
Aluminium EP Complex extremely high-viscosity (base oil ISO 2000) grease
with an extremely fluid consistency. High content of high purity colloidal
graphite.
NLGI 000 DIN OGPF000N-10 ISO-L-XADHB-000 -10ºC to +140ºC**
Designed specifically for SPLASH greasing systems requiring greater
fluidity and recovery of the grease in the crankcase (return). Suitable for
Tecalemit, Lincoln Helios (SKF-Lincoln), Delimon (Bijur-Delimon), Woerner,
Nortek, Neubor,… type SPRAY systems

Lubricating with SPRAY

MAXIGRAS 94 OGL/2500
Aluminium EP Complex extremely high-viscosity (oil base ISO 2500)
grease with a fluid consistency. High content of high purity colloidal
graphite.
NLGI 0/00 DIN OGPF0/00N-10 ISO-L-XADHB-0/00 -10ºC to +140ºC**
Designed specifically for SPRAY greasing systems with problems of
significant vibration and/or shock loads, where an extremely high viscosity
lubricant is required.

* NLGI grade in accordance with Type CG-1/CG-2
** Maximum operating temperature of the lubricant film (solid additives): + 250º C
11